ELITE XT - HOW TO INCREASE CLAMPING FORCE
INSTRUCTIONS
Page 2 of 3
www.maping.com
Retaining screw
to adjust clamping
strength. Use
2,5 mm hex key.
Tighten clamp: turn clockwise
Loose clamp: turn counter
clockwise.
5) Clamp strength adjustment:
both left and right locking has to
be adjusted!!!
6) Clamp strength test: take a 30 - 50 mm thick
80g normal copy paper. Place the block
to the clamp. Lock and close the clamp.
block of
8) Press the paper block down from left side, center and ride side.
9) Turn table back down and check if there is any gap between table and papers.
The larger the gap, the more clamp yields (not strong enough).
7) Turn table up.
+
-
ADJUSTMENT
TESTING
TESTING
TESTING
