- 26
6) SELECTION NUMBERS: Allows programmed selection numbers
to be viewed. (Use to check for erroneous selections)
7) SET DATE & TIME: Allows date and time to be set or viewed.
8) AUTO VENDS: Used internally to cycle-vend machines under test.
9) SERVICE PHONE #: Allows service phone number to be set. The
number is displayed when the machine is out-of-order. (Do not use
FASTCORP’S phone #)
10) SALES PIN CODE: Allows PIN code to be set and viewed for
machine auditing. # 2) Sales Meters may be accessed from outside
the machine without opening the door.
11) VEND BLOCK: Allows the machine to be disabled for up to 4
predetermined periods of time.
12) VEND BLOCK PIN CODE: Allows a PIN code to be set to access
the vend block function without opening the door.
13) HEALTH TIMER: Suspends Health Control for 1,2,3 or 4 hours;
Set freezer temperature scale to display in either Fahrenheit or
Centigrade; Set mode for Health Sensor: NAMA Ice Cream, Test,
Super Cold or Frozen Food.
14) PROGRAM VERSION: Displays version of firmware installed on
VMC.
15) DISPLAY LANGUAGE: Allows the programmer to choose the
language displayed on the screen. Choose from English, German or
Spanish. One additional language may be added to memory if
necessary.
16) LINE MODE: Shortens vend time by leaving the freezer lid open
between vends. Lid opens when currency has been detected. Lid
will close if there is no activity for 20 seconds.
17) MACHINE SERIAL NUMBER: Allows the programmer to enter up
to a 10-digit serial number for machine identification during DEXing.
18) FILL / DISPENSE: Allows coins to be dispensed from tubes while
displaying a coin count.
19) TOKENS & COUPONS: Allows coupons and tokens to be
recognized as free or valued vends and records sales in appropriate
DEX fields.
20) FIELD TEST: Allows the machine to run in a diagnostic mode to
allow for quick troubleshooting.
21) U/PDOWN TRAVEL LIMITS: This feature allows the customer to
adjust how deep the Picker Tip will descend into both tall and short
bins. NOTE: Increasing the number will cause the vacuum pump to
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | + 561-391-7200
