Page 10
For technical questions, please call 1-888-866-5797.
Item 63160
SAFET
y
Op
ERA
TION
M
AINTENAN
c
E
SETU
p
Adding Staples or Brads
TO pREVENT SERIOUS INJURy FROM AccIDENTAL OpERATION, BEFORE LOADING:
• Wear ANSI-approved safety goggles with side shields.
Other people in the work area must also wear ANSI-approved impact safety goggles with side shields.
• Release the Trigger.
• Unplug the tool from its electrical outlet.
• Attempt to fire the Tool into a piece of scrap wood to ensure that it
is disconnected and is incapable of firing any fasteners.
1. Turn the Stapler/Nailer upside down. Press
the Magazine Lock and pull the Pusher section
of the Magazine Assembly out as far as it will go.
Refer to Figure A.
2. Insert staples or brads into the Magazine so
that the pointed ends are facing outward.
Do not load staples and nails together.
Refer to Figure B.
3. Slide the Pusher assembly back into the
Stapler/Nailer until the Magazine Lock snaps
securely in place. Refer to Figure C.
Magazine
Lock
Magazine Assembly
pusher
Figure A
Figure B
Figure c
