“EGA Spółka z o.o.” Spółka Komandytowa ul. Rzeczna 1, Nowa Wieś Rzeczna
83-
200 Starogard Gdański tel,/fax:+48 58 56 300 80 www.ega.com.pl
WARNING
! The term "residual current device (RCD)" can be replaced by the term "residual current device
(GFCI)" or "residual current device (ELCB)".
3.
Personal safety
a) Stay alert, watch what you are doing and use common sense when operating the power tool. Do
not use the power tool when you are tired or under the influence of drugs, alcohol or
medications. A moment of inattention while using power tools can cause serious personal injury.
b) Use the personal protective equipment. Always wear an eye protection. Protective equipment,
such as dust masks, non-slip safety footwear, a protective helmet or hearing protection used in
appropriate conditions, will reduce injuries.
c) Prevent unintentional startup. Make sure the switch is in the off position before connecting to a
power source and/or battery, lifting or moving the tool. Moving the power tool with your finger on
the switch or turning on the power tool with the switch turned on may cause an accident.
d) Remove any adjusting key or wrench before turning the power tool on. A key left on a rotating part
of the power tool can cause injuries.
e) Do not overdo it. Always maintain the right posture and balance. This allows better control of the
power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewellery or long hair can be caught by moving parts.
g) If devices are provided for connecting the dust collecting and dust collecting devices, make
sure that they are connected and properly used. Using the dust collection can reduce the risk
associated with dust.
h) Do not let familiarization with frequent use of tools allow you to be complacent and ignore the
principles of tools security . Careless actions can cause serious injuries within a fraction of a second.
4.
Proper operation and operation of the power tool
h)
Do not force the tool. Use a power tool that is intended for this purpose.
A properly selected
power tool works better and safer in a given performance range.
i)
Do not use a power tool which switch is damaged. A power tool that cannot be turned on or off is
dangerous and must be repaired.
j)
Before adjusting the device, changing the accessories or after using the tool, pull out the plug
from the power socket. This preventive action reduces the risk of accidental switching on the power
tool.
k)
When the electric tool is not in use, it must be kept out of reach children o and other untrained
people. Power tools in the hands of inexperienced people are dangerous.
l)
The device must be properly maintained. Check for misalignment or fixing of moving parts,
broken parts and any other factors that may affect the operation of the power tool. The device
