4. Press
F2
to select the
“R”
User Field (refer to 3.5.7 Logo), press the Enter key to
insert, as shown below:
*
In the editing interface, the
F2
function is “ Insert User Field ”.
5. After the content is entered, press to switch to the “Save Exit” button and
confirm.
Message Edit Additional Instructions:
a. + key , move the cursor in units of one
pixel.
b. + key, move the cursor left and right in units of 100
pixels.
Bold, reverse, etc. for specific characters:
a. In the editor , Press to switch to the “Select” mode.
b. Use + to select the characters you want to
adjust.
c. After selected , press to adjust the property for the characters.
d. After adjusted , press to continue editing the normal
content.
Page
19
