1. Safety Guidelines
1.1 safety warning
•
Maintenance of this equipment must be performed by a maintenance
professional.
•
When the printer is connected to the power supply and related circuits, a
lethal voltage is generated. Non-professionals cannot open the circuit
compartment, and cannot check and repair the circuit system.
•
The consumables used in the printer may be flammable liquids. The use of
consumables must not only follow the Material Safety Data Sheet (MSDS)
instructions, but also the printer must be regularly inspected and maintained
to minimize safety hazards. (Note: The printer has an alarm function that has
been sent for maintenance time. Please pay attention to whether this
function is normal. If there is an alarm when the printer maintenance time
has expired, please notify the service engineer in time.)
1.2 Safety prevention
•
The installation of the printer should be stable and well grounded .
•
The printer must be installed in a ventilated place, away from heat, fire and
static electricity. No smoking near the printer.
•
The container lid of the ink, solvent and cleaning agent used in the printer
should be tightly closed and stored in a ventilated environment away from
the printer.
•
The printer should be kept clean, because the consumables used may be
flammable liquids, and the ink can burn after drying.
•
Place a carbon dioxide dry powder fire extinguisher near the printer.
1.3 Use
•
The printer is a non-contact inkjet device and is not suitable for all occasions
(such as explosive atmospheres). It should be used in accordance with
safety guidelines and provide a suitable working environment. Otherwise, the
consequences will be borne by the user.
Page
1
