46
FASTORA DAS-208CC Disk Array
“Quick Setup” assumes that there is only one partition on the disk array. To
start up, do the following steps:
Step 1
Press
ENTER
button to select to the “Enter Password” screen as
shown below in Figure 4-1. Use the
Up
and
Down
button to select
your desired number for your Password. You will receive a “Main
Menu” option screen once you enter a correct password. (See
Figure 4-2)
Figure 4-1
Enter Passwd:
0XXXXXXX
Figure 4-2
Main Menu
1 Quick Setup
Step 2
Press
SEL
to confirm your selection. This will bring you to set the
RAID level of the disk array. Use
UP
and
DOWN
button to select
the RAID level. Press SEL to confirm your selection again. Figure
4-3 shows the default value of the RAID set (RAID 5) of the unit.
Summary of Contents for DAS-208CC
Page 1: ...FASTORA DAS 208CC Disk Array User Guide For Ultra160 to Ultra160 RAID Subsystem V 1 0a ...
Page 23: ...23 FASTORA DAS 208CC Disk Array 3 4 1 Hierarchical Structure of Main Menu ...
Page 28: ...28 FASTORA DAS 208CC Disk Array 249 Partition 4 24A Del RAID Set To delete the RAID set ...
