Name of the parts and setup
Name and function of buttons and indicators vary depends on the model.
TOF-DL250A
TOF-DL250AC
TOF-DL250AM12
TOF-DL250A-5
TOF-DL250T
TOF-DL250TM12
TOF-DL250T-5
TOF-DL250DC
Stable indicator (stable: green/
unstable: red), OFF when laser
is OFF
Display
Output indicator３(orange)
Stable indicator (stable: green/
unstable: red), OFF when laser
is OFF
Output indicator (orange)
＋
Q1
Q1
Q1
SET
RUN
−
＋
Q2
Q1
Q1
RUN
−
Q1
Q2
SET
Q3
Q3
＋
Q2
Q1
Q1
Q2
SET
RUN
−
Display
Display
Output indicator 2 (orange)
Output indicator 1(orange)
Output indicator 2 (orange)
Output indicator 1(orange)
(2 indicators lit at same time)
Stable indicator (stable: green/
unstable: red), OFF when laser
is OFF
Button
Function while sensing
Function while setting
＋
−/Q1
RUN
SET
Q2(*)
Q3(*)
By pressing 1 second or more, Teaching of Output 1
will be done for current distance. Then, the display
shows “tc1” and the threshold level.
* For TOF-DL250AC, external input to be set “out”.
By pressing 1 second or more, Teaching of Output 2
will be done for current distance. Then, the display
shows “tc2” and the threshold level.
* For TOF-DL250DC, external input to be set “out”.
By pressing 1 second or more, Teaching of Output 3
will be done for current distance. Then, the display
shows “tc3” and the threshold level.
* External input to be set “out”.
Increase setting value
Decrease setting value
Back to “RUN” (sensing)
mode
Fix the setting value
Go to setting mode
By pressing 1 second or more, Keys will be locked and
the display shows “Loc”.
While keys are locked, by pressing 1 second or more,
key-lock will be released and the display shows “uLc”.
Go to setting mode
* Valid only for the model that has “Q2” and “Q3” shown on the panel.
Installation
Horizontal
to vertical
Vertical to
horizontal
M8 connector can be rotate from
horizontal position to vertical or
vertical position to horizontal as
picture above. Donʼt rotate exceeding
stopper. Doing so will cause breakage.
Tightening torque: 0.5N・ｍ Max.
Dimensions
[ mm]
■ Cable type, M12 pig-tail type
■ M8 connector type
●Without mounting bracket
M8 4pin connector
㻞㻤㻚㻞㻡
㻠㻚㻤
3.1
2.6
39.2
1.2
7
6
2.8
1.9
32.8
44.4
9
16
2-Φ3.1
Φ4.5 5 core 2m/5m cable
Φ4.5 M12 5 pin 300mm pig-tail cable
17.4
Receiver
Emitter
■ M8 connector type
㻞㻚㻤
㻟㻝㻚㻟
㻝㻞㻚㻢㻡
㻹㻤㻌㻠㼜㼕㼚㻌㼏㼛㼚㼚㼑㼏㼠㼛㼞
●With mounting bracket
2-M3
9
7.85
10.45
39.2
31.3
2.8
4.1
1.29
1.5
53.8
23.85
15
17.4
20
19.4
9.3
11.7
31.3
2-R
2.1
2-R
2.1
R22.1
20
°
Receiver
Emitter
Φ4.5 5 core 2m/5m cable
Φ4.5 M12 5 pin 300mm pig-tail cable
■ Cable type, M12 pig-tail type
Ramco Innovations www.optex-ramco.co 800-280-6933 nsales@ramcoi.com
