CPC514
C P C 5 1 4 U s e r M a n u a l
11
© 2 0 2 0 F a s t w e l V e r . 0 0 2
1
Introduction
The CPC514/CPC514RC CPU Module (hereinafter referred to as the Module) is implemented in
the CPCI Serial 3U form-factor and is a highly integrated solution based on the domestic Elbrus
platform.
The module is designed for use in real-time systems, manufacture control, and other data
acquisition and processing systems that operate in harsh environments and require reliability,
information security, and flexibility while supporting various extension interfaces.
The CPC514 module is used in forced air cooling systems, while the CPC514RC module is
intended for conduction cooled systems.
The conduction heat sink of the CPC514RC module enables you to build special-purpose systems
for working under harsh operating conditions.
This User Manual covers the both module versions.
1.1
General features
Elbrus-4S CPU (1891VM8YA):
- VLIW-processor of Elbrus architecture, 600 MHz;
- 4 processor cores;
- L1 cache of data for a core 64 KB;
- L1 cache of commands for a core 128 KB;
- L2 cache 8 MB.
RAM:
- DDR3 SDRAM 800 MHz with
ЕСС support, 8 GB, soldered, 2-channel.
Flash BIOS:
- 64 Mb SPI-Flash.
SSD 16 GB:
- Innodisk 3SE, SLC, soldered. Connected to the SATA II interface.
Video output:
- DisplayPort connector (resolution up to 1600x1200), routed to the front panel.
PCI-E bus:
- Routed via the PCI-E switch to J1 and J2 CPCI Serial connectors with of 2 devices x4;
- Routed via the PCI-E switch to J4 and J5 CPCI Serial connectors with support of 6 devices
х2;
- Support of the Non-transparent mode for the first x4 port;
- Support of PCI-E 2.0 (up to 5 Gb/sec).
SATA II interface:
- 3 interfaces for connecting drives are routed to the J3 CPCI Serial connector.
