External Connections
VIM301
V I M 3 0 1 U s e r M a n u a l
34
© 2 0 1 5 F a s t w e l v . 0 0 2
The following is necessary to put the module into operation:
Power voltage (+5 V, 0.5A) provided at PC/104-Plus connectors;
To use Planar EL panel it is necessary to provide a +12VDC source with current output
sufficient for the operation of the panel. The power can be supplied via PC/104-Plus
connectors or through the optional power connector XP1;
The following devices may be connected to the module to serve as a display unit:
CRT display with analog RGB interface connected to XP2 header
(except VIM301-02);
LCD panel with FP interface (9/12/18/24-
bit color, resolutions 640×480, 800×600,
1024×768, 1280×1024) connected to XP5 header;
LCD panel with LVDS interface (1 channel; 9/12/18/24-bit color, resolutions
640×480, 800×600, 1024×768, 1280×1024) connected to XP9 header;
LCD panel with FP interface (24-
bit color, resolutions 640×480, 800×600,
1024×768, 1280×1024) connected to XP6 header (for VIM301-02, -05);
LCD panel with LVDS interface (1 channel; 24-
bit color, resolutions 640×480,
800×600, 1024×768, 1280×1024) connected to XP10 header
(for VIM301-02, -05);
Planar EL panel with SGD interface (4-
bit color, resolution 320×240) connected
to XP4 header (for VIM301-03, -05);
To enable the video input function, it is necessary to have at least one video camera
connected to XP11 header.
