Right Side of Wheel Left Side of Wheel With Locking Plate
10) It's time to install your seat (or saddle) on your new e-bike. Take the seat post and seat
which we located in your component box in the beginning. On your frame, you'll see a QR
(quick release) seat post clamp. It’s much easier to secure your seat onto the seat post before
placing it onto your bike. Take your allen key and unfasten the two allen nuts on your seat post.
Place the seat on the bracket which sits on the seat post, then place the other bracket underneath
the seat so that it aligns with the rails on the seat. The nuts have square sides, and should fit into
their designated holes. Take your allen nuts and fasten the seat into a preferred position, which
can always be re-adjusted at a later time. You can now take your seat post and install it onto your
bicycle, fastening it with your hands by closing the QR seat post clamp. Notice that there is a
minimum assertion line on your seat post, and we highly recommend you abide by that line when
setting your seat post for preliminary safety measure.
