TOOLS NEEDED FOR ASSEMBLY:
*Snips or scissors to cut zip-tie straps
*Allen wrenches: 5mm, 4mm and 3mm
*18mm wrench for front axle nuts
*Adjustable wrench to install the pedals (or pedal wrench)
REMOVAL FROM BIKE BOX AND SET-UP:
We are going to begin removing your e-bike from the box. Upon opening your box, you will
find the frame with the back wheel already assembled, the front wheel and front fork strapped to
the frame, a component box, a battery box, and your battery charger all inside of the box.
For the time being, you can leave the three boxes inside and set up a flat, clean area where you're
going to install your e-bike. The easiest way to remove the bike from the box is to grab the bike
by the rear wheel rim and the frame, lifting it straight up until it clears the box itself. Lay the
bike on the area you had prepared making sure that the front wheel (which is strapped to the side
of the frame) is facing UP. Carefully cut the zip ties with snips or scissors and remove the front
wheel and set it to the side. We suggest avoid using a knife or razor knife due to possible
damage of frame. Once the front wheel has been removed, turn the bike over to free the
handlebars and front fork, setting the front fork aside as well.
You can remove the battery box, the component box, and the battery charger box at this time and
set the box your bike arrived in to the side.
