Bearing Beveled side up into steer
Beveled side down into headset cup
4) Now that your bearings are properly in place, insert your fork into the bottom of the headset
cup on the head tube. An important note is to make sure your braking system for the front fork is
located on the left side of your frame if you were in a riding position. Locate the chrome upper
bearing seat (only entire chrome piece in your component box) and slide it into the steer so that
the beveled side is facing down to match the bevel on the bearing.
5) Locate the steer dust cap and slide it down onto the upper bearing seat and bearing so that the
beveled side is facing up, as shown in the picture below.
