4 - EN
Technical specifications:
Model: Bellboy
Primary rating: 100/240VAC.
50/60HZ
Secondary rating (adapter recom-
mendation): 5 VDC, 2 A
Charging rate: 5V 2A (Charger not
included)
Charging cable: 150cm USB-A /
Magnetic pogopin (6mm)
Made in China
Indoor/outdoor: This Product is
suitable for Wet Location Use
IP Rating: IP44
Safety Class: Class III
Light source: 12x Cree J
lamp 2835 LED
On/Off switch: Step-
less dimmer.
Ambient tempera-
ture: -10 to 40 ºC
Materials: Polyethylene (Diffus-
er), Powder coated steel (Shade/
Spring), Aluminum (Base), ABS
(Cap/Baseplate), Silicone (Feet).
Internal battery: Li-ION 2x 2600
mA, 3,7V
Dimensions: 18x30cm
Weight: 1.13kg
If any of the items are damaged or
if the lamp doesn’t work, contact
your Fatboy dealer or search for
help via our website.
We do not recommend to use the
luminaire with the adapter con-
nected for a long time, this can seri-
ously reduce the battery life time!
The charger works when it’s con-
nected to the Bellboy:
• When the lamp is turned off,
you will see a red LED blinking
while the charing procedure is in
progress. When it lights up green,
the charging prodedure
has completed.
• When the lamp is turned on,
it will pulse OFF one time to
indicate the charging procedure
has started.
• If the lamp doesn’t charge
anymore, please contact your
Fatboy® dealer.
• If the lamp only works with
the charger connected, it may
indicate that the batteries are
defective. These can be replaced
with spare batteries offered via
www.fatboy.com or your local
Fatboy dealer.
• Do not use the lamp if the USB
cable is damaged.
If the lamp no longer works it may
be unsuitable for use. If this is the
case, please contact your
Fatboy® dealer for further informa-
tion on available spare parts.
Never attempt to repair the lamp
yourself without following the
proper instructions.
IMPORTANT!
Please contact your Fatboy® dealer
if you have any other problems.
