fatboy Hotspot Quadro, Manual

12

EN - 12

This heating product contains a heat and power 
source, which can be replaced by the end user and 
can be purchased from www.fatboy.com or from 
your local Fatboy® dealer. We do not recommend 
to use the Hotspot with the adapter connected for 
a long time, this can seriously reduce the battery 
life time!

NOTE: PLEASE MAKE SURE TO USE A 5V, 
2.4A CHARGER to avoid damaging to 
your Fatboy® Hotspot.

CE-Directive:

This product complies with the requirements 
and other relevant provisions of the current 
European RoHS and CE directives.

WEEE instructions:

This product is subject to the provisions of the 
WEEE directive 2012/19/EU. Do not dispose of 
this Product together with regular household 
waste. Consult your local waste disposal 
authorities for information on collection point for 
electrical and electronic waste products.

Terms of guarantee:

We thank you for purchasing this Fatboy® 
product and trust that you will enjoy its use.
Should you need to use our guarantee service, 
please contact your Fatboy® dealer. For more 
information about our dealers, please visit 
www.fatboy.com

NOTE:

Changes or modifications which are not 
explicitly approved by the party responsible 
for compliance may void the user’s authorization 
to use the equipment.

THIS MANUAL IN OTHER LANGUAGES? 
GO TO WWW.FATBOY.COM

Please contact your Fatboy® dealer or Fatboy® 
direct if you have any questions or problems.

The product is still not responding:

• If the product is not responding when you  

  connect the charger, please open-up the pillow      
   cover and check the connection between the    
  control panel inside the label and the battery.   
  These two are connected by a barrel plug, please  
  check to make sure they are connected properly.
• Also check the connection between the control  
  panel inside the label to the heating pad at the  
  same time.
• Please try to turn it on again, and check one final  
  time to see if the product responds to the charger. 

If these instructions didn’t resolve the issue, 
please get in touch with Fatboy® or your 
local Fatboy® dealer.

IMPORTANT!

Please contact your Fatboy® dealer 
if you have any problems.

Technical specifications:

Model: Fatboy® Hotspot 
Secondary rating (adapter recommendation): 
5 VDC 2.4 A
Safety Class: Class III
Connection: USB to Magnetic Pogo Pin charger
Heat source: Carbon mesh heating pad
Switch: Built-in three step heat control.
IP value: 21
Ambient temperature: -10 to 40 ºC
Materials: Polyester 
Internal battery: Lithium-ion battery 11.1v 
2600mAh.
Duration: Step1: 7.5hrs, Step2: 4hrs, Step3: 2.5hrs
Watt: Step1----3W, Step2----6W, Step3----9W.

Dimensions: 

Fatboy® Hotspot Lungo: 40cm x 55cm x 17,5cm
Fatboy® Hotspot Quadro: 45cm x 45cm x 17,5cm
Fatboy® Hotspot Blanket: 200cm x 140cm x 2cm 
(thickness approx. 2cm)

Total weight:

Fatboy® Hotspot Lungo: 1300 Grams
Fatboy® Hotspot Quadro: 1300 Grams
Fatboy® Hotspot Blanket: 1964 Grams

Rating info Fatboy® Hotspot
Charging rate 5V 2.4A (Charger included)
Rating: 11.1v DC
Heat Module: Carbon Mesh
Made in China

Model no:

Fatboy® Hotspot Lungo
Fatboy® Hotspot Quadro
Fatboy® Hotspot Blanket