19
USER MANUAL
7. Fault handling
The following table lists failure possible to appear in dairy use. Please contact company
service center or dealer if you cannot find answer from the listed examples.
Status
possible reason
possible solution
Machine
cannot work
power supply for plug
pull out the plug and pull in again
power plug or wire is wrong
contact customer service center or
dealer
fan doesn’t
work
machine doesn’t turn on
plug in and turn on
motor is wrong
ontact customer service center or
dealer
Machine on uneven ground
move to even and flat ground
loose or foreign particles come
inside
contact customer service center or
dealer
motor is loose
contact customer service center or
dealer
filter packing is not removed
please remove packing of every filter
bad perfor-
mance
washable filter is dirty
wash the dirty filter
Filters need to be replaced
replace new filter
machine inlet or outlet blocked
contact customer service center or
dealer
filter plastic packing is not
removed
removed packing and then use .
there is no enough space
around machine
please ensure there is 50cm distance
between two- side air inlet, the distan-
ce to air outlet is not less than 10 cm.
lack of filler or the filler is not
properly placed
Make sure all the filters are placed in
order in accordance with instructions
exceed cover
check whether room area is in ac-
cordance with the machine effective
cover area.
Summary of Contents for FA330H
Page 2: ...2 USER MANUAL CONTENTS ...
Page 22: ...www faton health com ...
