2nd edition, 31-03-2020
7000.05061, 2nd edition, 31-03-2020
7000.05061
Safety
7
2
Safety
2.1
Intended use
The motors described here are designed as drives for small machines and for speed-con-
trolled applications. The following points must be observed to ensure that the motors are
used as intended:
Handle the motors in accordance with the ESD regulations.
Do
not
use the motors in environments where it will come into contact with water,
chemicals and/or dust,
nor
in explosion hazard areas.
Always operate the motors within the limits specified in the data sheet.
Please ask the manufacturer for information about individual use under special envi-
ronmental conditions.
2.2
Safety instructions
NOTICE!
Electrostatic discharges can damage the electronics.
Wear conductive work clothes.
Wear an earthed wristband.
NOTICE!
Penetration of foreign objects can damage the electronics.
Do not open the housing.
NOTICE!
Connection and disconnection of cables while the supply voltage is still being applied at
the device can damage the electronics.
Do not connect or disconnect cables while the supply voltage is still being applied at the
device.
NOTICE!
Exposure of the motors to mechanical shock will damage the bearings and reduce the ser-
vice life of the motor.
Do not exceed the shock and vibrational loads defined in DIN EN 60068-2-27 and
DIN EN 60068-2-6.
