12
How to connect a gas bottle
a)
Turn the orange cap so that the arrow is pointing to the gap in the shroud.
b)
Remove the orange safety cap by pulling the lanyard out, then out. Do not use tools.
Leave the cap hanging.
c)
Check that the black sealing washer is fitted inside the cylinder valve. Place the regulator
down over the valve with switch.
d)
Turn the switch clockwise on gas bottle-‐then turn on the gas grill as instructed.
Figure 17
Warning:
Always test gas line for leaks at connector with soap water finishing all
connections.
How to disconnect a gas bottle
a)
Except for twin-‐cylinder installations with a changeover valve, turn off the gas tap if
fitted to the appliance. Wait until the burner and pilot light have gone out. For
installations with a changeover valve, it is only necessary to switch off the empty
cylinder.
b)
Replace the orange safety cap onto the empty cylinder.
8. Warning and safety points
Please read the following points before using your gas grill:
a)
Read the instructions before using the appliance
. Please follow all assembly instructions
in this manual; if instructions are not followed it may cause problems in use.
b)
This gas grill accessible
parts maybe very hot when being used. Keep young children
away.
Use protective when handling particularly hot components.
c)
In the event of a gas leak shut off gas to the gas grill, extinguish any open flames, open
lid and if leak continues check for damages, poor connections etc. Contact your local gas
dealer immediately if the problem can’t be solved.
d)
Do not move Gas grill during use
.
e)
Do not use or store any flammable liquids or vapors in the vicinity when operating the
gas grill.
f)
This gas grill only
to be used outdoors.
g)
Do not use a naked flame to check for gas leaks.
Summary of Contents for Bronzgrill 1
Page 18: ...17 ...
