FAVI FAVI Fixed Frame Projection Screen User Manual Download

Page: 4 / 4

3.) Installation

Step 1:

Install the two corner mounting brackets onto the two top corners of the frame.

Use the M5 screws to secure the mounting brackets to the M5 lock nuts you installed earlier.

You should have 8 of these screws. Four go in each top corner.

(M5 screws)

(M5 lock nut)

Step 2:

Mount the screen onto the wall using suitable mounting screws. FAVI recommends

that you hire a professional to mount this screen for you.

Summary of Contents for FAVI Fixed Frame Projection Screen

Page 2: ...led and inserted as shown in the image below Step 3 Insert the four plastic corner pieces into the ends of the frame pieces Step 4 After the frame corners are installed use the M3 screws to secure them into place You should have a total of 16 of these screws M3 screws 2 ...

Page 3: ...eves located on the four sides of the screen material Make sure to insert these carefully so they do not puncture through the sleeves Step 7 With the support rods attached to the screen tensioners you can now adjust the tension on the screen by adjusting the screws on the screen tensioners Once the screen surface is smooth the assembly is complete 3 ...

Page 4: ...M5 screws to secure the mounting brackets to the M5 lock nuts you installed earlier You should have 8 of these screws Four go in each top corner M5 screws M5 lock nut Step 2 Mount the screen onto the wall using suitable mounting screws FAVI recommends that you hire a professional to mount this screen for you 4 ...