EN - 61 -
Climate Class
Ambient
T
16 to 43 °C
ST
16 to 38 °C
N
16 to 32 °C
SN
10 to 32 °C
PART- 2.
THE VARIOUS FUNCTION AND POSSIBILITIES
Thermostat Setting
Warnings for Temperature Settings
• It is not recommended that you operate your fridge in environments colder than 10°C
in terms of its efficiency.
• This appliance is designed for use at an ambient temperature within the 16°C - 38°C
range.
• The thermostat setting should be done by taking into consideration how often the
fresh food and freezer doors are opened and closed, how much food is stored in the
refrigerator, and the environment in which the refrigerator is located.
• Your fridge should be operated up to 24 hours according to the ambient temperature
without interruption after being plugged in to be completely cooled. Do not open
doors of your fridge frequently and do not place much food inside it in this period.
• A 5 minute delaying function is applied to prevent damage to the compressor of your
fridge, when you take the plug off and then plug it on again to operate it or when an
energy breakdown occurs. Your fridge will start to operate normally after 5 minutes.
• Your fridge is designed to operate in the ambient
temperature intervals stated in the standards,
acc ording to the climate class stated in the
information label. It is not recommended that your
fridge is operated in the environments which are
out of the stated temperature intervals in terms of
cooling efficiency.
Thermostat control
Freezer thermostat automatically regulates the inside temperature of the compartments.
By rotating the knob from position 1 to 5, colder temperatures can be obtained.
Important note:
Do not try to rotate knob beyond 1 position it will stop your appliance.
Freezer & Refrigerator Thermostat Setting;
1 – 2 :
For short-term storage of food in the freezer compartment, you can set the knob
between minimum and medium position.
3 – 4 :
For long-term storage of food in the freezer compartment, you can set knob in the
medium position.
5 :
For freezing the fresh food. The appliance will work longer. So after you get the
cold condition you must position to previous position.
Summary of Contents for CF365
