RECOMMENDA
TIONS FOR CARE AND MAINTENANCE
RAIDER HARPOON
RECOMMENDA
TIONS FOR CARE AND MAINTENANCE
9
RAIDER HARPOON
All of the parts of your Favre-Leuba watch are
made from the best materials. Some of these
parts are subject to natural wear. You should
therefore have your watch serviced regularly
to ensure that it is working perfectly. The
frequency of servicing depends on the
model, the climate in which the watch is used
and the way it is treated. However, it is
generally advisable to have your watch
serviced carefully every four or five years
at an official Favre-Leuba service center.
These centers have the tools and equipment
required to carry out servicing work
professionally, and guarantee that their
services meet our strict quality standards.
The addresses of our service centers
can be found on our website at
www.favre-leuba.com
.
SERVICING YOUR WATCH
Equivalent values for water-resistance in both metric and
Anglo-Saxon systems:
Unit of measure Water-resistance
bar / atm (pressure)
10
20
30
50
m*
(meter)
100 200 300 500
psi
145 290 435 725
ft*
(foot)
328 656 984 1640
* The values of water depth, given in feet or meters, correspond to the pressure measured
during tests in accordance with the ISO 22810 standard.
Information about water-resistance in meters,
feet or bar refers to theoretical pressure and
temperature test standards and cannot be
equated with the actual depth of a dive. With
watches that are water-resistant up to 10
bar/100 m, you can wash your hands, take a
shower and go swimming; with watches that
are water-resistant from 20 bar/200 m
onwards, you can also go diving.
Please note the following information for the
optimal water-resistance of your watch:
• After every action such as manual winding
or setting the time, move the crown back
into position
1
and lock it by pressing and
simultaneously turning it clockwise to
position
0
.
• Protect the crown against impacts.
• Never use the crown or buttons under
water.
NOTE:
IMPORTANT:
