USER MANUAL
RAIDER SEA KING
TOLERANCES FOR W
ATCH MOVEMENTS
6
RAIDER SEA KING
Your Favre-Leuba watch has an automatic
movement. This means that the natural
actions of your wrist wind up the movement.
The movement, if fully wound, has a power
reserve of at least 38 hours so that you do
not have to wind the watch up every time
you take it off for a short period (e.g. over
night).
WINDING THE WATCH
Release the screwed-in crown (A) by rotating
it counterclockwise and moving it to position
1
. Now pull the crown out to position
3
to
set the time, which stops the movement.
Turn the crown in the appropriate direction
so that the hands (B and C) show the time
In months with fewer than 31 days, manual
adjustment of the date is necessary. To do
so, pull out the released crown (A) to
position
2
. Set the date (E) by
turning the
crown clockwise
. Then push the crown
back into position
1
and screw it by pressing
SETTING THE TIME AND STOPPING THE SECOND HAND
QUICK ADJUSTMENT OF THE DATE
Manual winding is necessary only when you
put your watch on for the first time or after
a lengthy period of not wearing it. To do so,
release the screwed-in crown (A) by rotating
it counterclockwise and thus moving it to
position
1
. Then turn the crown through
approximately 40 clockwise rotations to
wind the watch up fully. Then screw-in the
crown again by pressing and simultaneously
turning it clockwise to position
0
.
required. Then push the crown back into
position
1
and screw it by pressing and
simultaneously turning it clockwise to
position
0
. If the hour hand (B) moves past
midnight (24.00) when setting the time, the
date display (E) jumps forward by one.
and simultaneously turning it clockwise to
position
0
. You should not carry out any
quick adjustment of the date between
8.00 p.m. and 2.00 a.m., as the date is
auto matically being turned on by the
movement during this time.
MECHANICAL MOVEMENTS
The precision of a mechanical movement
varies depending on the habits of the person
who is wearing the watch.
TOLERANCES FOR WATCH MOVEMENTS
The accuracy of a mechanical watch from
Favre-Leuba is usually between 0 and +14
seconds a day.
