75
Jiefang J6 China IV, China V series instruction
S
im
p
le
in
spec
tio
n
a
n
d
m
a
in
te
n
a
n
ce
Maintenance
The clutch oil tank is located on the left side of
the front wall. Open the front outer panel. Check the
level of liquid level and add clutch hydraulic fluid if
insufficient.
Replace the clutch hydraulic control brake fluid
every 2 years.
Oil volume: about 0.3L, keeping the liquid level
between “H” Line and “L” line.
Oil: DOT3(Q/CAM-50).
Suspension maintenance
Tighten the bolt nuts of key components.
Caution
⊙
Before tightening bolts and nuts, make sure the
threads themselves and the surface to be connected
are clean.
⊙
Before tightening, bolt threads should be coated
with gear oil as required, and the gear brand is
80W/90 GL-5.
⊙
Each bolt thread should be evenly tightened to
the specified torque.
Carry out regular maintenance every 30,000 km
or every six months (2500 km for the first time).
Check and tighten the bolt and nut connected
under the shock absorber, and the tightening torque
value is shown in the table below.
Thread specifications
Tightening torque (Nm)
M16×1.5
220±30
Summary of Contents for J6 Jiefang IV Series
