148
Jiefang J6 China IV, China V series instruction
Appendix and Data
Fault alarm and analysis
Table 1 Explanation of instrument text tips
S/N
Text prompt content
Recommended measures
1
Over-temperature parking of transmission to cool
down
1. Please stop the vehicle and wait for the oil temperature of the gearbox to decrease before driving.
2
On-line detection of shifting system
1. Information hints indicate that professionals are conducting online testing. After the detection is completed, the key door can be
re-energized for normal shift operation.
3
Shifting system is self-checking
1. The message indicates that the gearbox is self-checking. After the self-checking is completed, the normal shift operation can be
carried out.
4
Self-checking fault of shift system
2. Please re-energize the key door. If the prompt is successful, it need not be processed.
3. The key door is still self-checked and fails many times to start the engine. If it can not start, this means it is not in neutral, please
contact the service station. If you can start the engine, you can try to shift to the service station as soon as possible for maintenance.
5
Successful self-checking of shift system
1. Information prompt, please operate the vehicle normally.
6
Air pressure is not sufficient in the gear shifting
system.
1. Start the engine and inflate it.
2. Long-term inflation is still prompted, please check the airway sealing.
7
Parking maintenance shifting system
1. Please stop as soon as possible and contact the service station personnel for maintenance.
8
Maintain the shifting system as soon as possible. 1. Please go to the service station as soon as possible for repair.
9
Please switch to the manual mode.
1. If the vehicle is unable to operate in automatic mode due to malfunctions, please go to the service station for repair.
10
Synchronization fault of shifting system
1. To shift the handle back to the neutral position, please re-mount the D gear.
2. If there are multiple prompts, please go to the service station for maintenance.
11
fault of main box gear selection
1. To shift the handle back to the neutral position, please re-mount the D gear.
2. If there are multiple prompts, please go to the service station for maintenance.
12
fault of main box gear selection
1. To shift the handle back to the neutral position, please re-mount the D gear.
2. If there are multiple prompts, please go to the service station for maintenance.
13
fault of auxiliary box gear selection
1. To shift the handle back to the neutral position, please re-mount the D gear.
2. If there are multiple reminders, and if the ambient temperature is below 0 C, drive in Gear 6 and below. When the oil temperature of
the gearbox rises, if there are still prompts, please go to the service station for maintenance.
14
The clutch disengagement is not in place.
1. To shift the handle back to the neutral position, please re-mount the D gear.
2. If there are multiple prompts, clutch self-learning will be carried out. After successful learning, if you still prompt, please go to the
service station for maintenance.
Summary of Contents for J6 Jiefang IV Series
