Maintenance every year
BOMAG
43
BT 60 / BT 65
Maintenance every year
5.12 Checking, adjusting the
valve clearance
!
Caution
Check and adjust only when the engine is cold
(20 +/- 10 °C). If necessary have this work per-
formed by a specialist workshop.
Valve clearance:
Intake valve (IN) = 0.15 mm (0.006 in)
Exhaust valve (EX) = 0.20 mm (0.008 in)
Fig. 41
l
Remove the top engine cover (Fig. 41).
Fig. 42
l
Unscrew the fastening screws for the cylinder
head cover (Fig. 42).
!
Caution
Do not apply force to remove the cylinder head
cover.
Replace the cylinder head cover if it is dented.
Fig. 43
l
Insert the screw driver into the recess (Fig. 43)
and take the cylinder head cover carefully off.
Fig. 44
l
Remove the recoil starter (Fig. 44).
Fig. 45
l
Align the alignment mark on the flywheel rib
(Fig. 45) with the top bore in the fan cover .
Go
to
Discount-Equipment.com
to
order
your
parts
