5.
Check the condition of the spark plug, clean if necessary.
6.
In case of excessive combustion residues or burned off elec-
trodes, replace the spark plug
.
7.
Check the electrode gap of the spark plug with a feeler
gauge, if necessary, adjust the gap.
ð
Nominal value:
0.7 - 0.8 mm (0.028 - 0.032 in)
8.
Carefully screw in the spark plug by hand.
9.
Once the sealing surface of the used spark plug is in contact,
tighten for another 1/8 to 1/4 turn with the spark plug
spanner.
NOTICE!
Danger of engine damage caused by a loose
spark plug!
–
Always screw the spark plug in correctly.
8.10.4
Servicing the V-belt
Protective equipment:
n
Working clothes
n
Safety shoes
n
Protective gloves
1.
Park the machine safely
Chapter 6.5 ‘Parking the machine
in secured condition’ on page 61
2.
Allow the engine to cool down.
3.
Unscrew the V-belt guard (1).
B-541-0037
Fig. 137
1
B-692-0151
Fig. 138
Maintenance – As required
DRP15X
103
Summary of Contents for DYNAPAC DRP15X
