7.
Tilt the machine to the opposite side and secure it properly.
8.
Fill in new oil.
9.
Stand the machine horizontally and check the oil level.
ð
Nominal value:
Bottom edge of filling/drain bore.
10.
Clean the bleed screw (1) and filling/drain plug (2) and screw
them in with a low-strength sealing agent (e.g. spare parts
number: 009 700 16).
11.
Dispose of oil in line with environmental regulations.
B-692-0014
Fig. 82
2
1
B-692-0015
Fig. 83
Maintenance – Annually / every 250 operating hours
BPR 50/55 D
84
Go
to
Discount-Equipment.com
to
order
your
parts
