7.
NOTICE!
Components may get damaged!
–
Use only oil of the permitted specifica-
tion.
Fill in hydraulic oil up to the mark on the steering rod head.
Mark:
approx. 40 mm (1.6 in) below the filler opening
8.
Slacken the bleeding screw.
9.
Wait until all air has escaped and then tighten the bleeding
screw.
10.
Fill in hydraulic oil up to the mark on the steering rod head.
11.
Screw in the filler screw.
12.
Dispose of oil in an environmentally friendly way.
Fig. 103
Fig. 104
Fig. 105
Fig. 106
Maintenance – Every 2 years / every 500 operating hours
BPR 50/55 D
91
Go
to
Discount-Equipment.com
to
order
your
parts
