7.1 Loading the machine
Loads may only be attached and hoisted by an expert/qualified
person.
Do not use lifting points that are damaged or impaired in any other
way.
Only use lifting and lashing tackle with sufficient load bearing
capacity for the weight to be loaded. Minimum load bearing
capacity of lifting tackle: see operating weight
Always use appropriate lifting and lashing tackle at the lifting and
lifting points.
Use lifting tackle only in the specified loading direction.
Lifting tackle must not be damaged by machine parts.
When lifting the machine, make sure the load does not move in an
uncontrolled way. If necessary, hold the load steady with guide
ropes.
Protective equipment:
n
Working clothes
n
Safety shoes
n
Protective gloves
1.
Park the machine safely
Chapter 6.4 „Parking the machine
in secured condition“ on page 55
.
2.
Allow the engine to cool down.
3.
Make sure that the protection hood is fastened correctly
Chapter 8.2.1.2 „Closing the protection
.
4.
Move the steering rod to an upright position and engage the
locking pawl lever.
B-692-0062
Fig. 44
Loading/transporting the machine – Loading the machine
BPR 50/55 D
58
Go
to
Discount-Equipment.com
to
order
your
parts
