8.9.7 Checking the hydraulic oil level
Protective equipment:
n
Working clothes
n
Protective gloves
1.
Park the machine in secured condition
„Parking the machine in secured condition“ on page 55
.
2.
Adjust the steering rod with height adjustment so that the
area with the filler screw is horizontal.
3.
Unscrew the filler screw.
4.
Press the handle forward against the stop and secure it using
suitable means.
5.
The oil level must reach the mark on the steering rod head, if
necessary, fill in hydraulic oil.
Mark:
approx. 40 mm (1.6 in) below the filler opening
NOTICE!
Components may get damaged!
–
Use only oil of the permitted specification.
Fig. 84
Fig. 85
Fig. 86
Fill in hydraulic oil, bleed the
system
Maintenance – Annually / every 250 operating hours
BPR 50/55 D
85
Go
to
Discount-Equipment.com
to
order
your
parts
