No open fire, do not smoke.
Do not spill any fuel. Catch running out fuel, do not let it seep into
the ground.
Keep dirt and water away from the fuel.
A leaking fuel tank can cause an explosion. Ensure tight fit of the
fuel tank cover, if necessary replace immediately.
Comply with the maintenance work described in the operating and
maintenance instructions, including the information concerning the
replacement of parts.
Maintenance work must only be performed by qualified and author-
ized persons.
Keep unauthorized persons away from the machine.
Do not touch hot engine parts.
Do not perform maintenance work while the motor is running.
Park the machine on level, firm ground.
Remove the key from the ignition switch.
Working on the engine
Drain the engine oil at operating temperature – danger of scalding!
Wipe off spilled oil, catch running out oil and dispose of environ-
mentally.
Store used filters and other oil contaminated materials in a sepa-
rate, specially marked container and dispose of environmentally.
Working on electric parts of the machine
Before starting to work on electric parts of the machine disconnect
the battery and cover it with insulating material.
Do not use fuses with higher ampere ratings and do not bridge
fuses - fire hazard!
Working on the battery
When working on the battery do not smoke, do not use open fire!
Do not let acid come in contact with hands or clothes! When
injured by acid flush off with clear water and seek medical advice.
Wear gloves and goggles.
Metal objects (e.g. tools, rings, watch straps) must not come in
contact with the battery poles – danger of short circuit and burning!
For recharging remove the plugs from the battery to avoid the
accumulation of highly explosive gases.
Observe the applicable instructions when starting with an auxiliary
battery.
Switch off the charging current before removing the charging
clamps.
Ensure sufficient ventilation, especially if the battery is to be
charged in a closed room.
Dispose of old batteries according to regulations.
Maintenance work
Safety regulations
BPR 35/42 D - BPR 35/60 D
20
Go to
Discount-Equipment.com
to
order your parts