6.10 Maintenance every year
6.10.1
Change the engine oil
WARNING!
Danger of scalding when draining off hot engine oil.
NOTICE!
Park the machine on level ground.
Drain the engine oil only when the engine is warm.
Change the engine oil at the latest after 250 operating
hours.
For quality and quantity of oil refer to the "table of fuels
and lubricants".
ENVIRONMENT!
Catch running out old oil, do not let it seep into the
ground and dispose off environmentally.
Screw the oil dipstick out of the oil filler opening .
Unscrew the oil drain plug and catch running out old oil
Clean the oil drain plug and screw it back in with a new seal
ring (tightening torque: 20 Nm (15 ft.lbs)).
Fill in fresh engine oil through the oil filler opening.
Screw the oil dipstick back in.
Perform a test and check the oil level, correct if necessary.
Check the drain plug for leak tightness.
Fig. 52
Maintenance
BPR 35/42 D - BPR 35/60 D
64
Go to
Discount-Equipment.com
to
order your parts
