8.9.8 Changing the oil in the rammer foot
NOTICE!
Components may get damaged!
–
Drain tamper foot oil only at operating tempera-
ture.
–
Ensure strict cleanliness.
–
Use only tamper oil of the permitted specifica-
tion.
–
Chapter 8.3 „List of fuels and
Protective equipment:
n
Working clothes
n
Safety shoes
n
Protective gloves
WARNING!
Danger of burning on hot components!
–
Wear your personal protective equipment (pro-
tective gloves, protective clothing).
–
Avoid touching hot components.
1.
Park the machine safely
Chapter 6.4 „Parking the machine
in secured condition“ on page 53
.
2.
Clean the area around filler and drain plug.
3.
Unscrew the drain plug, tilt the machine backward and collect
running out oil.
4.
Stand the machine on its foot again and secure it against tip-
ping over.
5.
Clean the drain plug and screw it in with sealing agent (low-
strength, e.g. spare parts number DL 009 700 16).
4
Screw M6x18
B-541-0047
Fig. 112
Maintenance – Annually
DR7X
92
Summary of Contents for Dynapac DR7X
