background image

1. Instructions for Use

This set includes 2 walkie-talkie units which are communication devices

that operate on 462/476 MHZ (optional). They come with 8/22 (optional)

channels as well as backlit LCD screen, enabling you to communicate

over several miles free-of–charge (up to 4 miles in open field).

IMPORTANT:

Please read all instructions carefully before using this

product. Retain this manual for future reference.

Specific Recommendations:

If you carry any personal medical device, please consult a doctor
before use.

To avoid the risk of burns, do not use the device if the antenna is
damage in any way.

Do not use the device in a potentially explosive environment (e.g.
Around pumps, on the lower deck of a boat or around a fuel-storage
installation or chemical products).

Turn the device off on planes and flights or in a hospital.

Never use the device close to a radio to avoid interference.

Remove the batteries if the device is not used for an extended battery
life. Never mix used and new batteries.

Position the transmitter and antenna at least 2 inches from your face.
Direct the antenna upwards and speak normally.

Clean the device with a damp cloth. Do not use any agent or solvent
for cleaning.

Do not modify the device in any way. In the event of damage
occurring, ensure that a qualified professional checks the device.

The device can’t be used for emergency calls.

Summary of Contents for TWIN SET









Reviews: