3-7
Chapter 3: BIOS setup
3.3.8
Digital IO Port Configuration
The items listed in this screen configure Digital IO settings.
DIO Port1~Port4 [Output], DIO Port5~Port8 [Input]
Configuration options: [Input] [Output]
The following item appears only when you set
DIO Port1~8
to [Output].
Output Level [High]
Configuration options: [High] [Low]
3.4
Chipset menu
The Chipset menu items allow you to change configuration options for the North
Bridge and South Bridge.
North Bridge
Primary Display [IGD]
Allows you to decide which graphics controller to use as the primary boot device.
Configuration options: [IGD] [PCIe]
Primary IGFX Boot Display [Auto]
Select the video device which will be activated during POST. This setting has
no effect if an external graphics device is present. The secondary boot display
selection appears based on your selection and the VGA mode is supported only on
primary display. Configuration options: [Auto] [HDMI] [eDP/LVDS] [DP]
LVDS Panel Support [Enabled]
Enables or disables LVDS panel support. Configuration options: [Disabled]
[Enabled]
LVDS Color Depth [Auto]
Select the color depth of the LCD panel to be used as display. Configuration
options: [Auto] [24-bit] [18-bit]
LVDS Channel Type [Auto]
Select the channel type of the LCD panel to be used as display. Configuration
options: [Auto] [Single] [Dual]
LVDS Brightness Type [Normal]
Allows you to select the LVDS brightness type. Configuration options: [Normal]
[Inverted]
Summary of Contents for FAY-003
Page 1: ...Industrial Motherboard FAY 003 ...
Page 9: ...FAY 003 1 4 ...
Page 40: ...FAY 003 A 3 FAQs To be added in later versions ...
