background image

Safety Instructions

Everyone involved with the installation, operation and maintenance of this device must:
- Be qualified
- Be skilled
- Have read the instructions in this user manual
- Be sure that neither the device nor the included accessories are damaged. Should the device or the 
included accessories be damaged, please contact your dealer for more information.
- Ensure that the device is in good working condition and safe to operate. Please follow the advice and 
instructions as they are described in this user manual.

Damage caused by misuse and/or modifications made to the device are not covered by the warranty.
This device does not contain any parts that need to be repaired or replaced by the user. Should maintenance
or repairs be necessary, they must be handled by a qualified technician.

Important information regarding health and safety:

- Do not remove any labels or stickers from this device.
- Do not leave any cables lying around.
- The device should not be opened up, and any hardware or software that may be present should not be 
modified.
- To achieve optimal performance, inputs on this device should not be fed with a signal higher than 
necessary.
- The device should only be used indoors; contact with moisture, water and rain should always be avoided. 
Do not place any objects containing liquids on top of the device.
- Remove the device from any nearby flames or heat sources; do not place it near flammable fluids, gasses 
or objects.
- Disconnect this device from the power supply if it will not be used for a longer period of time, if maintenance
is necessary, or if the device needs to be cleaned.
- Do not pull on the cable to remove a connector, as this could cause damage.
- Do not use any cables other than the ones described in this manual. Do not use defective cables. Please 
contact your dealer if the included or necessary cables do not function properly with this device.
- In the event that the device is exposed to extreme temperature changes (e.g. transported through a cold 
outdoor environment into a warm indoor environment), it should not be turned on until it has reached room 
temperature. This is necessary to prevent moisture from forming in the device, which could lead to electric 
shocks.

Guidelines and operation of this device:

- This device is intended for indoor use by adults.
- This device is not suitable for use by children, and should always be operated by an adult.
- This device should only be used in a suitable environment where no damage to the device can occur. Do 
not use the device in moist or dusty environments such as:

- indoor swimming pools where chlorine is used
- beaches where there is sand and salt
- outdoors
- indoors in spaces where intense heat sources are present, or where it reaches temperature levels 

that would be considered uncomfortable for a person
- Avoid impacts and collisions during use and transport. Do not transport the device while it is in use. Avoid 
using excessive force when installing and operating the device.
- The user should become familiar with the functions of this device before using it.

All information and illustrations shown in this user manual are subject to change without further notice.

User manual version: 1.0

Creation date + author initials: 07-05-2020 RV Revision date + author initials: 

WARNING!

Keep this device away from moisture, water and rain to avoid the chance of electric shocks.

Summary of Contents for DDK-120
























Reviews: