US-English | Original instructions
108
16 USING THE DRIVEPACK
16.1 Inserting the DRIVEPACK into the e-bike
NOTE
Risk of damage!
Improper handling may result in damage to the BATTERY and/or
retainer on the e-bike.
►
In order to avoid damaging the cover flap and/or the retainer in
the e-bike, make sure that the cover flap over the charging socket
on the BATTERY is closed correctly before inserting the DRIVEPACK
with BATTERY into the e-bike.
1. Place the interface
[A.1]
on the DRIVEPACK onto the corresponding interface
[B.1]
on the BOTTOM BRACKET.
B.1
A.1
2. Swing the upper end of the DRIVEPACK into the down tube of the e-bike.
Once you have correctly inserted the DRIVEPACK all the way into the down tube,
the locking mechanism of the LOCKER integrated in the down tube engages in
the retainer on the DRIVEPACK (audible click) and locks the DRIVEPACK in the
correct position.
The locking lever
[A.5]
or the locking lever moves into the closed position
automatically.
Summary of Contents for RIDE 5 0 TRAIL/STREET
