SPECIFICATIONS & DATA
42
20K Ohm balanced
100 Ohm
+20dBu
+18dBu
< -95dB
48kHz
> 116dB (A weighted)
< -95dB (A weighted)
60dB
20Hz - 20kHz +0.3dB
< 0.003%
90 - 240Vac / 50-60Hz
30W
2 x 3 (4 x 3) pin female XLR
6 x 3 (8 x 3) pin male XLR
shielded RJ45, Dynamic or Static IP
2 x RJ45
1 x USB "B"
3 pin IEC
1U (44mm) (1.75")
482mm (19")
230mm (9.1")
3.0kg (6.6 lb)
PROCESSING___________________________________________________________
Signal Generator
Input & Output Gain
Noise Gate
Dynamic Loudness Filter
Parametric EQ
Optional Filter types
Center Frequency
Q value / Bandwidth
EQ Gain range
IIR Crossover Filter
Linear Phase Filter
FIR Crossover Filter
RMS Compressor
Peak Limiter
Delay
FIR Filter
GENERAL________________________________________________
Input Impedance
Output Impedance
Max. Input Level
Max. Output Level
Crosstalk
Sample Rate
Signal to Noise Ratio
Noise Floor
Common Mode Rejection Ratio
Frequency Response
THD (+4dBu 1kHz)
Mains Voltage Range
Nominal Power Consumption
CONNECTORS____________________________________________
Audio Input
Audio Output
Ethernet
RS485
USB
Mains
PHYSICAL________________________________________________
Height
Width
Depth
Weight
White/Pink noise - Level range: -30dBu +10dBu
-18dB +12dB, step 0.1dB
Threshold: -80dBu -45dBu
Attack time: 1ms 1000ms
Release time: 1ms 1000ms
Gain range: 0dB -10dB
Attack speed: fast/medium/slow
Input channels up to 31 optional types of EQ
Output channels up to 8 optional types of EQ
Bell classic and constant Q filter, 1st order high Shelf filter,
2nd order high Shelf filter, Variable Q high Shelf filter,
1st order low Shelf filter, 2nd order low Shelf filter, Variable
Q low Shelf filter, 1st order low-pass filter, 2nd order
low-pass filter, Variable Q low-pass filter, 1st order high-pass
filter, 2nd order high-pass filter, Variable Q high-pass filter,
Band pass filter, notch filter, 1st order all-pass filter,
2nd order all-pass filter with variable Q value
Adjustable within the frequency range of 20Hz-20kHz with
a step accuracy of 1Hz
The Q value range of Bell filter is 0.4 - 128, the step is 0.01,
the range of the Q value of the Chevron/highpass/lowpass
filter is 0.1 - 5.1 and the step is 0.01, the value range of
bandpass /notch filter Q is 4 - 104 and step is 1
-15dB +15dB
Butterworth slope: 6/12/18/24/36/48dB per octave, Bessel
slope: 12/24dB per octave, Linkwitz-Riley slope:
12/24/36/48dB per octave
Linkwitz-Riley: 24/48dB per octave
Type: high pass/low pass/band pass/external import Taps
range: 256 - 512, slope range 21 - 120dB per octave Time
window type: Rect/Sinc/Keiser/Hanning/Hamming/Blackman/
Blackman-Harris/Blackman-Nuttal/Nuttal/Keiser-Bessel/Sine
Starting threshold range: -10dBu +20dBu
Compression ratio range: 2 32:1
Soft and hard knee: 0 - 100%
Attack time: 0.1ms - 1000ms
Release time: 10ms - 15000ms
Gain compensation: Max 12dB
Threshold range: -10dBu +20dBu
Attack time: 1ms - 1000ms
Release time: 10ms - 3000ms
The adjustable delay time of each input c output
channel is 452ms, step accuracy 0.0104ms
Each input channel and output channel can import FIR
filter with 48kHz sampling rate and 512 taps