ELECTRONICS
FCI Electronics
Manual Part No. 415839-001
Issued: Date (01/22/99)
Page 4 of 5
Rev. 12/10/01 ECR V10367 Revision C
If the wire is to be inserted and not solder push the wire gently to the bottom of the
hole. If the wire is to be soldered, advance the wire into the hole just until the wire
insulation barely enters the hole.
Squeeze the pliers’ handles until the top detail hits the top of the bottom detail. This
inserts the wire.
PDM: Rev:C Released
STATUS: Printed: Oct 03, 2003
