P a g e
|
11
Soap Dispensing
Range Adjustments
No adjustments are required for most settings.
Factory default range is set at 1 cm.
The factory
setting should be satisfactory for most
installations.
To invoke the sensing range adjustment, press
the button below the dispenser and hold it until
the LED starts flashing slowly, about five
seconds. Press the button again and hold for 5
seconds until the LED flashes continuously.
Place a medium target such as small card board
below the sensor eye at the desired range until
the LED stops flashing. Remove the target to
complete setup.
Summary of Contents for MagicRound ASD-0001
Page 5: ...P a g e 5 Part List...
Page 8: ...P a g e 8...
