background image

   

 

 

 

 

 

 

     

    

Orion-M

 

 

FDC Orion-M 

 

 

 

PREFACE 

Safety Information in this Manual 

Notes, cautions and warnings appear throughout this book to draw your  attention to important operational and 
safety information. 
 
A “

NOTE

” marks a short message to alert you to an important detail. 

 
A “

CAUTION

” safety alert appears with information that is important for protecting your equipment and 

performance. 
 
A “

WARNING

” safety alert appears with information that is important for protecting you, others and equipment 

from damage.  Pay very close attention to all warnings that apply to your application. 
 
 

This symbol (an exclamation point in a triangle) precedes a general CAUTION or WARNING 
statement. 

 
 

This symbol (a lightning bolt in a lightning bolt in a triangle) precedes an electric shock hazard 
CAUTION or WARNING safety statement. 
 

 

Technical Assistance 

If you encounter a problem with your Orion-M controller, review all of your configuration information to verify 
that  your  selections  are  consistent  with  your  application:    inputs;  outputs;  alarms;  limits;  etc.    If  the  problem 
persists after checking the above, you can get technical assistance by d1 (866) 342-5332 or by faxing 
your request to +1 (866) 332-8014, Monday thru Friday, 8:00 a.m. to 5:00 p.m. Eastern Standard Time.  You 
can also email your request to 

support@futuredesigncontrols.com

 
An applications engineer will discuss your application with you. 
 

Please have the following information available: 

 
• Complete Model #’s and/or Serial #’s for Component(s) in Question 
• Complete Software Version #’s 
• All Configuration Information 
• All User Manuals 

 
Warranty and return information is on the back cover of this manual. 

 

Your Comments 

Your comments or suggestions on this manual are welcome.  Please send them to: 
Future Design Controls, P.O. Box 1196, Bridgeview, Illinois, 60455 
Telephone: +1 (888) 751-5444; fax: +1 (888) 307-8014 

csr@futuredesigncontrols.com

 

 
 
The Orion-M Honeywell UDC2500/3200 Controller System Guide is copyrighted by Future Design Controls, 
Inc., © 2009, all rights reserved (

http://www.futuredesigncontrols.com/Orion-M.htm

). 

.   
 
 
 

 

 

Summary of Contents for Orion-M















Reviews: