ELI101-IPHW
User’s Manual
5/28/20
Copyright ©2020
Page
8
of
15
Connectors
Figure 4. ELI101-IPHW Connectors
Power Details
A 12VDC +/- 5% power supply with a 2.0A output will power any board from the ELI Family. This
allows a common, off-the-shelf power supply such as the
or prototyping across the entire ELI Family. In general, any 12VDC power supply with a 2.1mm
center positive plug will be acceptable if it can provide enough current to power the ELI unit being
used. On the ELI101-IPHW plug power into the (P2) connector.
The ELI101-IPHW input power range is expanded to i5 to 24V DC ± 5% (2.0A) for greater
design flexibility.
