Document Number:
MAN
– FD215CV-C-TS (-1)
Rev:
B
Revision Date:
01/10/2017
Page 11 of 16
©
2017 FDS Avionics Corp.
All Rights Reserved.
TECHNICAL SUPPORT
470-239-7421 or FDSAvionics.com
Operation Instructions
The FD215CV-C-TS(-1) is continuously on but can be de-energized by removing power
from the video system. No pilot or aircrew action is necessary during flight or ground
operation.
The operator will be able to change the video output from the FD215CV-C-TS(-1) using
the video source select button on the display.
When applying 28VDC power, the display will turn on and look for a valid input on the
last known source. If no input is found, the display will go to standby mode. Pressing
the Source button will rotate through available video inputs.
Button Controls
Located on the front of the FD215CV-C-TS(-1) are 8 buttons:
BUTTON DESCRIPTION
PWR
Turns ON/OFF the system.
MENU
Activates the OSD menu for the monitor settings or goes
to previous menu.
AUTO
Auto-adjustment in RGB.
Moves the highlight icon down through menu options.
Moves the highlight icon up through menu options.
Decreases the adjustment of the selected function.
Increases the adjustment of the selected function.
SCE
Cycles through available input sources.
