FE 150 RLX
This document is protected by copyrights.
Copying, using, or distributing without permission of Fe Powertools BV is prohibited.
31
4.5. MT4 tap chuck × 60 mm with adapter
For screw taps with sizes from M24 to M42 and from 7/8″ to 1
-
5/8″. Install the chuck
in the spindle. To cut threads in blind holes, use adapters with a clutch.
Requires an adapter that matches the size of the screw tap.
Screw tap size
(metric)
Adapter Ø60
without clutch
Adapter Ø48
without clutch
Adapter Ø31
without clutch
M8
–
–
WKL-000072**
M10
–
–
WKL-000073**
M12
–
–
WKL-000074**
M14
–
WKL-000079*
WKL-000075**
M16
–
WKL-000080*
WKL-000076**
M18
–
WKL-000081*
WKL-000077**
M20
–
WKL-000082*
WKL-000078**
M22, M24
–
WKL-000083*
–
M24
WKL-000086
WKL-000084*
–
M27
WKL-000087
WKL-000085*
–
M30
WKL-000088
–
–
M33
WKL-000089
–
–
M36
WKL-000090
–
–
M42
WKL-000091
–
–
* Requires a 60×48 mm reduction adapter (RDC-
000012)
** Requires a 60×31 mm reduction adapter (RDC-
000011)
Part number (box, tap chuck, coolant 85 ml / 3 oz):
OPR-0584-07-00-00-1