FE 150 RLX
This document is protected by copyrights.
Copying, using, or distributing without permission of Fe Powertools BV is prohibited.
10
3. STARTUP AND OPERATION
3.1. Installing the handles
Attach the handles to the feed shaft. You can install the shaft so that the handles are
on the opposite side of the machine. To do this, lift the motor to the maximum and
continue in the sequence that follows.
1
2
(20 mm, 0.8″)
3
(30 mm, 1.2″)
4
6
(30 mm, 1.2″)
5
7
(20 mm, 0.8″)
8
