FE 150 RLX
This document is protected by copyrights.
Copying, using, or distributing without permission of Fe Powertools BV is prohibited.
12
To remove the arbor (drill bit, tap chuck), continue as follows. If the arbor (tap
chuck) has a nut (
1
), remove the nut. Next, lift the motor and
turn the spindle (
2
) to
align the holes in the spindle and gearbox (
3
). Put the drift into the hole (
4
). Next,
hold the carrying handle with one hand and hit the drift with a mallet (
5
).
2
3
4
5
1
