5.3 Inspecting the Battery
- 26 -
3. After the battery check,
If the battery is fully charged:
The RUN LED (green) on the front of the UPS will light up and
the UPS will return to the normal operation.
The LCD panel will display the following for 5 seconds, then
return to the screen before the automatic battery check.
If the battery is not fully charged:
A warning beep will sound and the BATTERY CONDITION LED
(orange) on the front of the UPS will flash.
Go to step 4.
RUN LED (green) is lit.
Battery Check: GOOD
Beep
(continuous sound)
Battery Check: NG
BATTERY ALARM LED
(orange) begins to flash