6.3 Screen Operations
- 42 -
2. Turn Off Warning Buzzer "[Buzzer Cut Setting]" screen
(1) Press the [MENU] button to display the "Menu Display" screen. Use the directional
key ( button or button) to move the cursor [>] to [SETTINGS], and press the
[SET] button.
(2) The UPS setting indication screen appears.
(3) Shift cursor [>] to Turn Off Buzzer “[Buzzer cut]” using the direction button (
button or button), and press the [SET] button.
(4) Turn Off Buzzer “[Buzzer Cut Setting]” screen appears.
Disabling buzzers:
[Backup]
to disable during backup operation
[BattLow]
to disable when the battery voltage drops during backup operation
[Fault]
to disable when a failure occurs
[Boot Fail]
to disable when an input error occurs during product startup
[Over Load]
to disable when an overload occurs
[BattNG]
to disable when battery check result is NG
[BattLife]
to disable when maturity of battery lifetime
[BattCheck]
to disable at start of battery check
[All
]
to disable in all modes
“Buzzer cut” is for turning off the warning buzzer for each action mode below:
