3.1 Installing the UPS
7
The following spaces are required for an installation location.
The UPS takes in air through the vent hole on the front of the UPS and
exhausts air through the cooling fan on the back of the UPS. Therefore, the
space of 10cm or more is required in the front and rear of the UPS.
When performing maintenance of the UPS:
The space of approximately 1m is required in the front and rear of the UPS.
Confirm the environment of the installation location. The recommended environment in
consideration of the battery life, etc. is as follows.
Item
Recommended environment
Temperature
15 to 25 degrees C
Humidity
30 to 70% (no condensation)
10cm
or more
UPS
F
ro
n
t
s
id
e
R
e
a
r
s
id
e
Intake
air
10cm
or more
Right side
Exhaust
air
UPS
F
ro
n
t
s
id
e
R
e
a
r
s
id
e
Right side
Space for
battery
maintenance
Space for
maintenance
1m or more
1m or more
UPS
F
ro
n
t
s
id
e
R
e
a
r
s
id
e
Right side
Space for
battery
maintenance
Space for
maintenance
1m or more
1m or more
Summary of Contents for M-UPS050AD1B
Page 3: ......