13
INSTALLING LARGE CROSSRIBS.
•
Position large crossrib to lay on top of gunwale tubes.
Slide forward towards pins on gunwale tubes. Rotate
crossrib into position.
•
Place crossrib between gunwale pins nearest you by push-
ing gunwale bar up over end of crosspiece and snapping
into position.
FOR BOW CROSSRIB:
•
There are two black plastic blocks mounted on the keel
bar. One is mounted with a screw and can be rotated.
When rotated away from the other block, it is in the
“open” position. Have the block set in the “open” position.
•
Insert pin located on bottom of crossrib into stationery
black block on keel bar. Twist the second block into the
“closed” position. Snap crosspiece into position on
gunwales, then chines.
14
REPEAT STEP 13 FOR INSTALLATION OF STERN CROSSRIB.
•
Procedure is the same, except for twister.
Feathercraft
K-Light Classic
16
A
B
Note: This step is done when frame is in the skin.
For illustration purposes, we have shown it without the skin.
Delrin “twister”
K-Light_Classic_English 11/5/07 9:20 AM Page 16
